TUNGSTEN Round Bar & Rods, Sheets, Wires Manufacturer & Supplier

  • Home
  • TUNGSTEN Round Bar & Rods, Sheets, Wires Manufacturer & Supplier

ASTM BF288 Tungsten Round Bars & Rods, Sheets

India’s Leading Manufacturer & Supplier of Tungsten HE 397 Wire Spool, Tungsten HA 190 Hex Bar, Tungsten Alloy HE 395 Bars, Tungsten HE 3925 Rectangular Bar, ASME SF288 Alloy HA 1925 Welding Wire Supplier in Mumbai, India.

Kanak Steel & Engg Co. is an approved manufacturer and stockist of PURE TUNGSTEN / SHEET / ROD / WIRE, which used for oven linings, kilns, lead pots, boiler baffles, and so on.
Molybdenum in Sheets will increase their resistance to many chemical corrodes and marine environments. Meanwhile, Pure Tungsten Sheets has extremely good rupture and tensile energy at excessive temperatures. It profits corrosion resistance from use of a nonmagnetic strong answer of ferric carbide or carbon in iron within the production process. Molybdenum addition in Rods offers specifically better resistance to pitting and crevice corrosion in chloride environments. It can face up to a whole lot extra time and abuse earlier than displaying symptoms and symptoms of wear. It is appropriate for packages from polluted marine environments to regions with sub-0 temperatures.
Properties are comparable besides that Pure Tungsten Rods is fairly more potent at accelerated temperatures. It is with no trouble brake or roll formed, welded, soldered and reduce with the aid of using each thermal and mechanical methods. Heat remedy of Sheets from 1050 Degree C to 1150 Degree C guarantees that each one carbides are in answer. It has excellent resistance to thermal fatigue and intermittent heating at excessive temperatures. It isn’t counselled for the extreme thermal surprise of repeated liquid quenching.
It is regularly used at cryogenic temperatures, with extremely good durability to -450 Degree F, and coffee magnetic permeability. Pure Tungsten Wires has a whole lot higher creep energy at accelerated temperatures than different austenitic metal grades. Because of its excessive chromium and mild nickel content material, it’s miles proof against sulfidation. It is used at temperatures as much as 1150 Degree C in non-stop service, and 1035 Degree C in intermittent service. It has advanced resistance to oxidation and the retention of a bigger fraction of room temperature energy than the not unusual place austenitic alloys. The key houses of Rods are its excessive chromium and medium nickel content material making its resistance to oxidation. It has extremely good forming and welding characteristics. It is largely non-magnetic, however turns into barely magnetic whilst worked.

Largest Manufacturer & Supplier of Tungsten HE 390 Threaded Rods, Tungsten Alloy HE 390 Carbide Rods, Tungsten HE 190 HR Sheets, ASTM F288 Tungsten HA 1925 Sheets, Tungsten HE 390 Bars in Mumbai, India.

Tungsten Round Bar Equivalent Grades

Element Grade
Tungsten HA 190 / HA 1925 / HA 195 / HE 390 / HE 3925 / HE 395 / HE 397

Tungsten Round Bar & Rods, Wires Chemical Composition

W (>%) Chemical Content (< %)
99.999 Fe Ca Be Sn Al Ni Zn Sb Pt K Ta Na
0.0001 0.00005 0.000005 0.000005 0.00005 0.00001 0.00005 0.00005 0.00003 0.000005 0.0001 0.00005
Cr Pb As Mg Ti Bi Mo Cd Cu Ba Co Mn
0.000005 0.00001 0.00005 0.00005 0.000005 0.00001 0.00001 0.000005 0.000007 0.00001 0.000005 0.000005
99.99 Fe Ca Be Sn Al Ni Zn Sb Pt K O Na
0.0001 0.00045 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0005 0.0040 0.0009
Cr Pb As Mg Ti Bi Mo Cd Cu Ba Co Mn
0.0001 0.0001 0.0001 0.0001 0.0001 0.0001 0.0002 0.0001 0.0001 0.0001 0.0001 0.0001
99.95 Fe Ca P Sn Al Ni N Sb Si O Pb As
0.005 0.003 0.001 0.0001 0.002 0.003 0.003 0.001 0.003 0.003 0.0001 0.002
Mg C Bi Mo
0.002 0.005 0.0001 0.001

Tungsten Round Bars Mechanical Properties

Tensile Strength KSI (MPa)-RT 250 (1725)
KSI (MPa)-500°C 150 (1035)
KSI (MPa)-1000°C 75 (515)
Elongation % in 1.0″ —
Hardness DPH 300
Modulus of Elasticity KSI 58000
GPa 400

Tungsten Round Bars Typical Physical Properties

Density lb/in3 0.70
gm/cm3 19.27
Melting Point °F 6170
°C 3410
Thermal Conductivity Cal/cm2/cm°C/sec 0.48
Specific Heat Cal/gm/°C 0.032
Coefficient of Linear Thermal Expansion 10-6 (°F) -1 2.40
10-6 (°C) -1 4.30
Electrical Resistivity Microhm-cm 5.50

Specification of ASTM F288 Tungsten Round Bar & Rods, Sheets, Shims

Standard ASTM ASTM F288 / ASME SF288
Grades HA 190 / HA 1925 / HA 195 / HE 390 / HE 3925 / HE 395 / HE 397
Tungsten Bar Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Tungsten Round Bar size Diameter: 3-~800mm
Tungsten Hex Bar size 2-100mm A/F
Tungsten Flat Bar size Thickness: 2 -100mm
Width: 10 to 500mm
Tungsten Square Bar size 4 to 100mm
Tungsten Angle Bar size 3mm*20mm*20mm~12mm*100mm*100mm
Tungsten Rectangular Bars Section 3.0 to 12.0mm thickness
Tungsten Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Tungsten Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Tungsten Threaded Bar Billet Size 1/2 to 495mm Diameter
Tungsten Rectangular Size 33 x 30mm to 295 x 1066mm
Tungsten Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
ASTM F288 Tungsten Hollow Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Tungsten T-Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Rolled Tungsten Flat Bars Condition Hardened & tempered, annealed
ASTM F288 Tungsten Cold Rolled Bar Technique Tungsten Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
ASME SF288 Tungsten Rod Processing Bar cutting to 650mm
Tungsten Rounds Bar Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Our Tungsten Round Bar conforms to NACE MR0175/ISO 15156

Tungsten Bar Specifications

Thickness (mm) Width (mm) Length (mm)
2～15  <500 <500
1～2  <500 <1000
0.5～1  <500 <500
0.3～0.5  <500 <500
0.2～0.3  <500 <500

Tungsten Round Bar Size & Dimensions

ASTM F288 Tungsten Round bar Size & Dimensions
Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

ASME SF288 Tungsten Square Bar Sizes And Schedules

Size in (Milimeter) Weight Chart per M (Kilogram) Size in (Milimeter) Weight Chart per M (Kilogram)
12 x 12 1.14 30×30 7.11
16 x 16 2.02 40 x 40 12.60
20 x 20 3.16 50 x 50 19.80
25 x 25 4.94 – –

ASTM F288 Tungsten Flat Bar Size

Sizes in mm Size (inch) Thickness (mm) Thickness (in Inches)
22 7/8 17 & 18 2/3 – 5/7
25 1 5 to 20 3/16 – 4/5
30 1-3/16 5 to 20 3/16 – 4/5
32 1-1/4 6 to 20 1/4 – 4/5
35 1-3/8 5 to 20 3/16 – 3/16
40 1-4/7 5 to 25 3/16 – 1
45 1-7/9 5 to 25 3/16 – 1
47 1-6/7 17,25 & 32 2/3, 1 & 1-1/4
50 2 5 to 32 3/16 – 1-1/4
55 2-1/16 5 to 25 3/16 – 1
57 2-1/4 32 1-1/4
60 2-3/8 5 to 35 3/16 – 1-3/8
63 2-1/2 10 to 30 3/8 – 1-3/16
65 2-5/9 10 to 30 & 35 3/8 – 1-3/16, & 1-3/8
70 2-3/4 6 to 25 & 40 1/4 – 1, & 1-4/7
75 3 8 to 25 5/16 – 1
80 3-1/8 8 to 20 5/16 – 4/5
90 3-1/2 8 to 20 5/16- 4/5
100 4 8, 10, 12 5/16, 3/8, 1/2

Tungsten Hollow Bar Sizes And Schedules

Size Chucked true to OD Chucked true to ID
OD,
mm		 ID,
mm		 Max. OD,
mm		 Min. ID,
mm		 Max. OD,
in.		 Min. ID,
in.		 Max. OD,
mm		 Min. ID,
mm		 Max. OD,
in.		 Min. ID,
in.
32 20 31 21.9 1.220 0.862 30 21 1.185 0.827
32 16 31 18 1.220 0.709 30 17 1.181 0.669
36 25 35 26.9 1.378 1.059 34.1 26 1.343 1.024
36 20 35 22 1.378 0.866 34 21 1.339 0.827
36 16 35 18.1 1.378 0.713 33.9 17 1.335 0.669
40 28 39 29.9 1.535 1.177 38.1 29 1.500 1.142
40 25 39 27 1.535 1.063 38 26 1.496 1.024
40 20 39 22.1 1.535 0.870 37.9 21 1.492 0.827
45 32 44 33.9 1.732 1.335 43.1 33 1.697 1.299
45 28 44 30 1.732 1.181 43 29 1.693 1.142
45 20 44 22.2 1.732 0.874 42.8 21 1.685 0.827
50 36 49 38 1.929 1.496 48 37 1.890 1.457
50 32 49 34.1 1.929 1.343 47.9 33 1.886 1.299
50 25 49 27.2 1.929 1.071 47.8 26 1.882 1.024
56 40 55 42 2.165 1.654 54 41 2.126 1.614
56 36 55 38.1 2.165 1.500 53.9 37 2.122 1.457
56 28 55 30.3 2.165 1.193 53.7 29 2.114 1.142
63 50 62 51.9 2.441 2.043 61.1 51 2.406 2.008
63 45 62 47 2.441 1.850 61 46 2.402 1.811
63 40 62 42.2 2.441 1.661 60.8 41 2.394 1.614
63 36 62 38.3 2.441 1.508 60.7 37 2.390 1.457
63 32 62 34.4 2.441 1.354 60.6 33 2.386 1.299
71 56 69.9 58 2.752 2.283 68.9 57 2.713 2.244
71 45 69.9 47.3 2.752 1.862 68.6 46 2.701 1.811
71 40 69.9 42.4 2.752 1.669 68.5 41 2.697 1.614
71 36 69.9 38.5 2.752 1.516 68.4 37 2.693 1.457
75 60 73.8 62 2.906 2.441 72.8 61 2.866 2.402
75 50 73.8 52.2 2.906 2.055 72.6 51 2.858 2.008
75 40 73.8 42.5 2.906 1.673 72.3 41 2.846 1.614
80 63 78.8 65 3.102 2.559 77.8 64 3.063 2.520
80 50 78.8 52.4 3.102 2.053 77.4 51 3.047 2.008
80 45 78.8 47.5 3.102 1.870 77.3 46 3.043 1.811
80 40 78.8 42.6 3.102 1.677 77.2 41 3.039 1.614
85 67 83.7 69.1 3.295 2.720 82.6 68 3.252 2.677
85 55 83.7 57.4 3.295 2.260 82.3 56.0 3.240 2.205
85 45 83.7 47.6 3.295 1.874 82.1 46.0 3.232 1.811
90 71 88.6 73.1 3.488 2.878 87.6 72.1 3.449 2.839
90 63 88.6 65.3 3.488 2.571 87.3 64.0 3.437 2.520
90 56 88.6 58.5 3.488 2.303 87.1 57.0 3.429 2.244
90 50 88.6 52.6 3.488 2.071 87.0 51.0 3.425 2.008
95 75 93.5 77.3 3.681 3.041 92.4 76.2 3.641 2.997
95 67 93.5 69.3 3.681 2.728 92.2 68.0 3.630 2.677
95 50 93.5 52.7 3.681 2.075 91.8 51.0 3.614 2.008
100 80 98.5 82.3 3.878 3.240 97.4 81.2 3.835 3.197
100 71 98.5 73.4 3.878 2.890 97.2 72.1 3.827 2.839
100 63 98.5 65.5 3.878 2.579 97.0 64.0 3.819 2.520
100 56 98.5 58.7 3.878 2.311 96.8 57.0 3.811 2.244
106 80 104.4 82.5 4.110 3.248 103.1 81.2 4.059 3.197
106 71 104.4 73.5 4.110 2.894 103.0 72.1 4.055 2.839
106 63 104.4 65.7 4.110 2.587 102.7 64.0 4.043 2.520
106 56 104.4 58.9 4.110 2.319 102.5 57.0 4.035 2.244
112 90 110.3 92.5 4.343 3.642 109.2 91.4 4.299 3.598
112 80 110.3 82.6 4.343 3.252 108.9 81.2 4.287 3.197
112 71 110.3 73.7 4.343 2.902 108.7 72.1 4.280 2.839
112 63 110.3 65.8 4.343 2.591 108.5 64.0 4.272 2.520
118 90 116.2 92.7 4.575 3.650 114.9 91.4 4.524 3.598
118 80 116.2 82.8 4.575 3.260 114.6 81.2 4.512 3.197
118 71 116.2 73.8 4.575 2.906 114.5 72.1 4.508 2.839
118 63 116.2 66.0 4.575 2.598 114.2 64.0 4.496 2.520
125 100 123.1 102.7 4.846 4.043 121.9 101.5 4.799 3.996
125 90 123.1 92.8 4.846 3.654 121.7 91.4 4.791 3.598
125 80 123.1 82.9 4.846 3.264 121.4 81.2 4.780 3.197
125 71 123.1 74.0 4.846 2.913 121.3 72.1 4.772 2.839
132 106 130.0 108.8 5.118 4.283 128.8 107.6 5.071 4.236
132 90 130.0 93.0 5.118 3.661 128.4 91.4 5.055 3.598
132 80 130.0 83.1 5.118 3.272 128.1 81.2 5.043 3.197
132 71 130.0 74.2 5.118 2.921 121.2 72.1 5.035 2.839
140 112 137.9 115 5.429 4.528 136.6 113.7 5.378 4.476
140 100 137.9 103.1 5.429 4.059 136.3 101.5 5.366 3.996
140 90 137.9 93.2 5.429 3.669 136.1 91.4 5.358 3.598
140 80 137.9 83.3 5.429 3.280 135.8 81.2 5.346 3.197
150 125 147.7 128.1 5.815 5.043 146.5 126.9 5.768 4.996
150 106 147.7 109.3 5.815 4.303 146 107.6 5.748 4.236
150 95 147.7 98.4 5.815 3.874 145.7 96.4 5.736 3.795
150 80 147.7 83.6 5.815 3.291 145.3 81.2 5.720 3.197
160 132 157.6 135.3 6.205 5.327 156.3 134 6.154 5.276
160 122 157.6 125.4 6.205 4.937 156 123.8 6.142 4.874

Tungsten Hex Bar Tolerance Table

ASTM F288 Tungsten Round Bar & Hex, Flat Tolerance (BS 970-3)
Shape / Section Size, Diameter or Width across Flats Permitted Variation
mm mm
Round ≥6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100		 + 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
Flat (Thickness) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80		 + 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.250
+ 0 to – 0.350
Flat (Width) < 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 100
> 100 ≦ 130
> 130 ≦ 160
> 160 ≦ 320		 + 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.190
+ 0 to – 0.220
+ 0 to – 0.350
+ 0 to – 1.00
+ 1.00 to – 1.00
Square and
Hexagon 		≥ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 105		 + 0 to – 0.090
+ 0 to – 0.110
+ 0 to – 0.130
+ 0 to – 0.160
+ 0 to – 0.250
Tolerances of Turned Tungsten Bars / Rod (BS 970-3)
Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18
> 18 ≦ 30
> 30 ≦ 50
> 50 ≦ 80
> 80 ≦ 120
> 120 ≦ 180
> 180 ≦ 250
> 250 ≦ 315
> 315 ≦ 400
> 400		 + 0 to – 0.070
+ 0 to – 0.085
+ 0 to – 0.100
+ 0 to – 0.120
+ 0 to – 0.140
+ 0 to – 0.160
+ 0 to – 0.185
+ 0 to – 0.210
+ 0 to – 0.230
+ 0 to – 0.250

Tungsten Round Bar Surface Finishes

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

Tungsten Round Bar / Wire Uses

Defence Making arms and ammunition
Military To produce Cold headed components
Automobile Industries to make nuts, bolts, shafts Used in Agricultural sector
Manufacturing gears, bearings, and hinges For Oil and Gas
Oil and Gas industry Heavy engineering Industries

Tungsten Alloy Round Bar Weight Chart

ASME SF288 Tungsten Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3″ 10.900 35.762
1/8″ 0.019 0.062 22mm 0.908 2.979 3-1/4″ 12.800 41.996
5/32″ 0.029 0.095 7/8″ 0.926 3.038 3-1/2″ 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4″ 17.001 55.780
3/16″ 0.043 0.141 25mm 1.180 3.871 4″ 19.306 63.340
5mm 0.047 0.154 1″ 1.210 3.970 4-1/4″ 21.908 72.249
7/32″ 0.058 0.190 26mm 1.271 4.170 4-1/2″ 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4″ 27.366 90.249
1/4″ 0.076 0.249 1-1/8″ 1.534 5.033 5″ 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2″ 36.690 121.000
5/16″ 0.118 0.387 1-1/4″ 1.924 6.349 6″ 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2″ 51.093 167.630
9mm 0.152 0.498 1-3/8″ 2.303 7.550 7″ 59.432 196.000
3/8″ 0.170 0.557 35mm 2.390 7.553 7-1/2″ 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8″ 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10″ 121.048 397.140
7/16″ 0.232 0.761 1-1/2″ 2.715 8.951
12mm 0.271 0.889 40mm 3.009 9.872
1/2″ 0.303 0.994 1-5/8″ 3.200 10.449
13mm 0.318 1.043 1-3/4″ 3.712 12.179
14mm 0.368 1.207 45mm 3.807 12.555
9/16″ 0.383 1.256 1-7/8″ 4.260 13.977
15mm 0.424 1.391 48mm 4.330 14.205
5/8″ 0.473 1.551 50mm 4.698 15.414
16mm 0.481 1.578 2″ 4.848 15.906
17mm 0.543 1.791 2-1/8″ 5.475 17.963
11/16″ 0.573 1.880 2-1/4″ 6.135 20.128
18mm 0.610 2.001 60mm 6.768 22.205
3/4″ 0.682 2.237 2-3/8″ 6.838 22.435
2-1/2″ 7.576 24.856
2-5/8″ 8.354 27.409
2-3/4″ 9.169 30.083
  • Tungsten Round Bars
  • Tungsten Grade HA 190 Round Bars
  • Tungsten Grade HA 195 Round Bars
  • Tungsten Grade HE 390 Round Bars
  • Tungsten Grade HE 395 Round Bars
  • Tungsten Grade HA 190 Flat Bars
  • Tungsten Grade HA 195 Flat Bars
  • Tungsten Grade HE 390 Flat Bars
  • Tungsten Grade HE 395 Flat Bars
  • Tungsten Grade HE 397 Flat Bars
  • Tungsten Cold Drawn Bars
  • Tungsten Grade HA 190 Cold Drawn Bars
  • ASTM F288 Tungsten Cold Drawn Bars
  • ASME SF288 Tungsten Cold Drawn Bars
  • Pure Tungsten Cold Drawn Bars
  • Tungsten Grade HA 190 Square Bars
  • Tungsten Grade HA 1925 Square Bars
  • Tungsten Grade HA 195 Square Bars
  • Tungsten Grade HE 390 Square Bars
  • Tungsten Grade HE 3925 Square Bars
  • Tungsten Grade HA 1925 Rectangular Bars
  • Tungsten Grade HE 390 Rectangular Bars
  • Tungsten Grade HE 3925 Rectangular Bars
  • Tungsten Grade HE 395 Rectangular Bars
  • Tungsten Grade HE 397 Rectangular Bars
  • Tungsten Grade HA 190 Hot Rolled Bars
  • Tungsten Grade HA 195 Hot Rolled Bars
  • Tungsten Grade HE 390 Hot Rolled Bars
  • Tungsten Grade HE 395 Hot Rolled Bars
  • Tungsten Grade HE 397 Hot Rolled Bars
  • Tungsten Grade HA 190 Hexagon Bars
  • Tungsten Grade HA 1925 Hexagon Bars
  • ASTM F288 Tungsten Hexagon Bars
  • ASME SF288 Tungsten Hexagon Bars
  • Pure Tungsten Hexagon Bars
  • Tungsten Grade HA 1925 Threaded Bars
  • Tungsten Grade HE 390 Threaded Bars
  • Tungsten Grade HE 3925 Threaded Bars
  • Tungsten Grade HE 395 Threaded Bars
  • Tungsten Grade HE 397 Threaded Bars
  • Tungsten Grade HA 190 Hollow Bars
  • Tungsten Grade HA 1925 Hollow Bars
  • Tungsten Grade HA 195 Hollow Bars
  • Tungsten Grade HE 390 Hollow Bars
  • Tungsten Grade HE 395 Hollow Bars
Tungsten Hot Rolled Sheets Tungsten Cold Rolled Sheets
HA 195 Tungsten Sheets HA 190 Tungsten @ CR Sheets
HE 390 Tungsten HR Sheets HE 395 Tungsten Sheets
ASTM F288 Tungsten Sheets ASME SF288 Tungsten Sheets & Plates
ASTM F288 Tungsten Hot Rolled Sheets ASTM F288 Tungsten CR Sheets
HA 1925 Tungsten HR Sheets HE 3925 Tungsten Sheets
Tungsten Alloy HA 190 Rods Tungsten Alloy HE 397 Shims
ASTM B365 Tungsten Sheets ASTM B365 Tungsten HR Sheets
ASTM B365 Tungsten Wires ASTM B365 Tungsten Wires/Rods/Sheets