Carbon Steel IS 1239/IS 3589 Buttweld Pipe Fittings
India’s Leading ANSI B16.9 Carbon Steel IS 3589 Welded Buttweld Fittings, Mild Steel IS 3589 Seamless Fittings, IS 1239 Industrial Pipe Fittings, IS 3589 END Cap, IS 3589 Pipe Fittings Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a permitted manufacturer and trader of IS 1239 Pipe Fittings / IS 3589 Pipe Fittings, which are ideal for features in which there’s a non-stop opportunity of corrosion.
It provide extra helpful pitting and corrosion protection, due to improved ranges of nickel and molybdenum within the alloy. Carbon Steel IS 1239 Reducer Pipe Fittings is used for the packages which might be uncovered to salt water, acids together with chloride and sulphuric acid, chemical compounds and petrochemicals, in conjunction with excessive-warmness together with engines and motors. Products encompass tanks, helps and frames, enclosures and housings, engine, motor and equipment elements and additives. It may be a chilly rolled or a warm rolled product. However, warm rolled plate has a tedious gray, mill finish, while bloodless rolled has a brighter and clean finish.
If they’re bloodless rolled, it’s far pretty simply the aspect for a brilliant quantity of various home equipment however for specially the ones in which sanitation and/or corrosion are the subject of concern. It is a famous and fee-powerful shape of metallic, presenting wonderful corrosion resistance and amazing workability notwithstanding its sturdiness. Mild Steel IS 3589 Concentric Reducer Pipe Fittings is non-magnetic and is derived in exclusive finishes, in addition to reflect and different variations, in which required. They are being produced at excessive temperatures and convey a cloth this is pretty proof against paintings hardening and indicates decreased ranges of deformation residual pressure.
Applications for such fittings encompass: automobile equipment and frames, agricultural implements, drums and barrels, structural additives and frames, popular fabrication, and different. Carbon Steel IS 1239 Eccentric Reducer Pipe Fittings is identified for its excessive yield weldability, sturdiness and strength, even at low temperatures. It is a low carbon tempered and quenched alloy metallic that could be an excessive appearing and low-fee cloth for excessive put on device and structural use packages. Its excessive put on and sturdiness residences could make it a fee-powerful choice. It may be drilled, punched and machined. It is formable, machinable and weldable via way of means of the use of the best techniques.
Largest Manufacturer & Supplier of IS 1239 Eccentric Reducer, IS 1239 SR Elbow, ANSI B16.9 Carbon Steel IS 1239 Butt weld Tee, Black Steel IS 3589 Buttweld Elbow, IS 1239 45 Degree Elbow in Mumbai, India.
Specification Of Carbon Steel IS 1239/IS 3589 Pipe Fittings
IS 1239/IS 3589 Carbon Steel Pipe Fittings size | IS 1239/IS 3589 Seamless Butt Weld Fittings : 1/2″ – 10″ IS 1239/IS 3589 Welded Butt Weld Fittings : 1/2″ – 48″ |
---|---|
Carbon IS 1239/IS 3589 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Carbon IS 1239/IS 3589 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
IS 1239/IS 3589 Buttweld Pipe FittingsType | DN15-DN1200 |
IS 1239/IS 3589 Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Grade IS 1239/IS 3589 Pipe Fitting |
Size Range | ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) IS 1239/IS 3589 Buttweld Fitting |
IS 1239/IS 3589 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
IS 1239/IS 3589 Carbon Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
IS 1239/IS 3589 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | Carbon IS 1239/IS 3589, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
IS 1239/IS 3589 Pipe Elbow Dimensions Standard
NOMINAL PIPE SIZE | ALL FITTINGS | ALL FITTINGS | ELBOWS AND TEES | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | REDUCERS | CAPS |
---|---|---|---|---|---|---|---|---|
NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Centre -to- End Dimension A, B, C, M | Centre-to- Centre O | Back-to- Face K | Alignment of Ends U | Overall Length H | Overall Length E |
½ to 2½ | 0.06 -0.03 |
0.03 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
3 to 3 ½ | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
4 | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
5 to 8 | 0.09 -0.06 |
0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
10 to 18 | 0.16 -0.12 |
0.12 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
20 to 24 | 0.25 -0.19 |
0.19 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
26 to 30 | 0.25 -0.19 |
0.19 | 0.12 | … | … | … | 0.19 | 0.38 |
32 to 48 | 0.25 -0.19 |
0.19 | 0.19 | … | … | … | 0.19 | 0.38 |
Carbon IS 1239/IS 3589 Pipe Fittings Dimensions Standard
Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Dimensions Chart Of Carbon Steel IS 1239/IS 3589 Reducer Fittings
NOMINAL PIPE SIZE | OUTSIDE DIAMETER | END TO END | |
---|---|---|---|
Inch | D | P | H |
3/4 x 1/2 | 26.7 | 21.3 | 38 |
3/4 x 3/8 | 26.7 | 17.1 | 38 |
1 x 3/4 | 33.4 | 26.7 | 51 |
1 x 1/2 | 33.4 | 21.3 | 51 |
1 1/4 x 1 | 42.2 | 33.4 | 51 |
1 1/4 x 3/4 | 42.2 | 26.7 | 51 |
1 1/4 x 1/2 | 42.2 | 21.3 | 51 |
1 1/2 x 1 1/2 | 48.3 | 42.2 | 64 |
1 1/2 x 1 | 48.3 | 33.4 | 64 |
1 1/2 x 3/4 | 48.3 | 26.7 | 64 |
1 1/2 x 1/2 | 48.3 | 21.3 | 64 |
2 x 1 1/2 | 60.3 | 48.2 | 76 |
2 x 1 1/4 | 60.3 | 42.2 | 76 |
2 x 1 | 60.3 | 33.4 | 76 |
2 x 3/4 | 60.3 | 26.7 | 76 |
2 1/2 x 2 | 73 | 60.3 | 89 |
2 1/2 x 1 1/2 | 73 | 48.3 | 89 |
2 1/2 x 1 1/4 | 73 | 42.2 | 89 |
2 1/2 x 1 | 73 | 33.4 | 89 |
3 x 2 1/2 | 88.9 | 73 | 89 |
3 x 2 | 88.9 | 60.3 | 89 |
3 x 1 1/2 | 88.9 | 48.3 | 89 |
3 x 1 1/4 | 88.9 | 42.2 | 89 |
3 1/2 x 3 | 101.6 | 88.9 | 102 |
3 1/2 x 21/2 | 101.6 | 73 | 102 |
3 1/2 x 2 | 101.6 | 60.3 | 102 |
3 1/2 x 1 1/2 | 101.6 | 48.3 | 102 |
3 1/2 x 1 1/4 | 101.6 | 42.2 | 102 |
4 x 3 1/2 | 114.3 | 101.6 | 102 |
4 x 3 | 114.3 | 88.9 | 102 |
4 x 2 1/2 | 114.3 | 73 | 102 |
4 x 2 | 114.3 | 60.3 | 102 |
4 x 1 1/2 | 114.3 | 48.3 | 102 |
5 x 4 | 141.3 | 114.3 | 127 |
5 x 3 1/2 | 141.3 | 101.6 | 127 |
5 x 3 | 141.3 | 88.9 | 127 |
5 x 2 1/2 | 141.3 | 73 | 127 |
5 x 2 | 141.3 | 60.3 | 127 |
6 x 5 | 168.3 | 141.3 | 140 |
6 x 4 | 168.3 | 114.3 | 140 |
6 x 3 1/2 | 168.3 | 101.6 | 140 |
6 x 3 | 168.3 | 88.9 | 140 |
6 x 2 1/2 | 168.3 | 73 | 140 |
8 x 6 | 219.1 | 168.3 | 152 |
8 x 5 | 219.1 | 141.3 | 152 |
8 x 4 | 219.1 | 114.3 | 152 |
8 x 3 1/2 | 219.1 | 101.6 | 152 |
10 x 8 | 273.1 | 219.1 | 178 |
10 x 6 | 273.1 | 168.1 | 178 |
10 x 5 | 273.1 | 141.3 | 178 |
10 x 4 | 273.1 | 114.3 | 178 |
12 x 10 | 323.9 | 273.1 | 203 |
12 x 8 | 323.9 | 219.1 | 203 |
12 x 6 | 323.9 | 168.3 | 203 |
12 x 5 | 323.9 | 141.3 | 203 |
14 x 12 | 355.6 | 323.9 | 330 |
14 x 10 | 355.6 | 273.1 | 330 |
14 x 8 | 355.6 | 219.1 | 330 |
14 x 6 | 355.6 | 168.3 | 330 |
16 x 14 | 406.4 | 355.6 | 356 |
16 x 12 | 406.4 | 323.9 | 356 |
16 x 10 | 406.4 | 273.1 | 356 |
16 x 8 | 406.4 | 219.1 | 356 |
16 x 6 | 406.4 | 168.3 | 356 |
18 x 16 | 457 | 406.4 | 381 |
18 x 14 | 457 | 355.6 | 381 |
18 x 12 | 457 | 323.9 | 381 |
18 x 10 | 457 | 273.1 | 381 |
18 x 8 | 457 | 219.1 | 381 |
20 x 18 | 508 | 457 | 508 |
20 x 16 | 508 | 406.4 | 508 |
20 x 14 | 508 | 355.6 | 508 |
20 x 12 | 508 | 323.9 | 508 |
20 x 10 | 508 | 273.1 | 508 |
20 x 8 | 508 | 219.1 | 508 |
22 x 20 | 559 | 508 | 508 |
22 x 18 | 559 | 457 | 508 |
22 x 16 | 559 | 406.4 | 508 |
22 x 14 | 559 | 355.6 | 508 |
22 x 12 | 559 | 323.9 | 508 |
24 x 10 | 559 | 273.1 | 508 |
24 x 22 | 610 | 559 | 508 |
24 x 20 | 610 | 508 | 508 |
24 x 18 | 610 | 457 | 508 |
24 x 16 | 610 | 406.4 | 508 |
24 x 14 | 610 | 355.6 | 508 |
24 x 12 | 610 | 323.9 | 508 |
24 x 10 | 610 | 273.1 | 508 |
Carbon Steel IS 1239/ IS 3589 Pipe Fittings Suppliers India |
ASME B16.9 Seamless Carbon Steel IS 1239 Pipe Fittings, Carbon Black Elbow, CS IS 3589 Reducer Weight Chart
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
90 Deg Elbow | 45 Deg Elbow | Equal tee | 90 Deg Elbow | 45 Deg Elbow | Equal tee | 90 Deg Elbow | 45 Deg Elbow | Equal tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Carbon Steel IS 1239/IS 3589 Elbow 90 Deg, Elbow 45 Deg, Return Elbow 180 Deg Dimension
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Weight Chart of CS IS 1239 Reducing Tee, Carbon Steel IS 1239/IS 3589 Concentric & Eccentric Reducers
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50×25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50×40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100×50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100×80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150×80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150×100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200×100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200×150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
ASME B16.28 Carbon Steel IS 1239/IS 3589 Buttweld Fitting Classes
Class | Construction | Non-destructive Examination |
---|---|---|
S | Seamless | None |
W | Welded | Radiography or Ultrasonic |
WX | Welded | Radiography |
WU | Welded | Ultrasonic |
Carbon IS 1239/IS 3589 Types of Buttweld Fittings We Supply
Sch 80 Ferritic IS 1239/IS 3589 Eccentric Reducer | IS 1239/IS 3589 Industrial Buttweld Pipe Fittings |
ANSI B16.9 Carbon IS 1239 Pipe Cap | IS 3589 Carbon Weldable 3D Elbow |
IS 1239 Carbon 180° Buttweld Elbow | Carbon IS 3589 Lap Joint Stub Ends Stockists |
BS4504 IS 1239 45° Long Radius Elbow | Carbon Steel IS 1239 Carbon Steel Short Radius Elbow Exporter |
IS 1239 Pipe Bends | IS 3589 Carbon Pipe Elbow |
Carbon Steel IS 1239 Seamless Buttweld Fittings | Sch 80 Carbon IS 3589 Pipe Fittings |
CS IS 3589 Pipe Fittings Supplier in Mumbai | Carbon IS 1239 Butt weld Pipe Fittings Manufacturer in India |