Duplex Steel S31803/S32205 Buttweld Pipe Fittings
India’s Leading ANSI B16.9 Duplex Steel S32205 Buttweld Fittings Supplier, Duplex WERKSTOFF NR. 1.4462 Cross, S31803 Duplex Stainless Steel Dish Cap, UNS S32205 Seamless Fittings, Buy DSS S31803 Butt weld Reducer Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is a permitted manufacturer and exporter of Duplex 2205 Pipe Fittings / Grade UNS N031803 Pipe Fittings, which are typically utilized in Gas, Petrochemical and Oil industries.
It is simply normalised metallic that is being warmness dealt with and as an end result indicates tensile electricity and more yield than the greater preferred grades. They are tremendously praised for its advanced electricity, mild weight, competence, corrosion resistance and maximum beneficial quality. Grade UNS S32205 Elbow Pipe Fittings are thermostatically built and balanced through the use of metallic alloys within the organisation and aid of maximum current technology. They are pretty immune to appalling climate and its chemical composition makes it hard to rust at the same time as the use of in city and business environment. They are pretty regarded for its mild weight, competence, maximum beneficial quality, corrosion resistance and advanced electricity.
The use of corrosion resistance metallic will face the situations higher due to introduction of an enthusiast defensive oxide movie at the floor, if it’s being left undisturbed. Meanwhile, using climate resistant metallic as nicely makes those supply in longer carrier life. Grade UNS S31803 45-Degree Elbow Pipe Fittings is supposed for advanced electricity low alloy structural metallic through 100mm thickness to 345Mpa minimal yield point. It indicates signal of advanced corrosion resistance over preferred carbon metallic because of the increase of a defensive oxide movie at the metals floor which slows down similarly corrosion.
They are pretty famed as ‘the weathering metallic’ and additionally as a protecting layer that develops at the metallic floor whilst used uncoated and in hazardous climate situations. Duplex Steel 2205 90-Degree Elbow Pipe Fittings are immune to horrific climate and its chemical composition makes it immune to rust at the same time as the use of in business and concrete environment. They are getting used for one-of-a-kind varieties of welded, bolted and riveted constructions, for example metallic body structures, tanks and containers, bridges, exhaust systems, cars and system constructions. Obtainable in distinctive tolerances, floor and dimensional properties, they’re very tons identified for his or her ideal sturdiness and quality.
Largest Manufacturer & Supplier of Duplex Steel S31803 Two Joint Pipe Fittings, DIN 1.4462 LR/ SR Elbow Trader, DSS S32205 Reducer Dealer, SAF 2205 Buttweld Elbow, Duplex Stainless Steel S31803 Buttweld Pipe Fittings in Mumbai, India.
Duplex Steel UNS S31803/S32205 Pipe Fittings Equivalent Grades
STANDARD | UNS | WNR. |
---|---|---|
Duplex Steel 2205 | S31803 / S32205 | 1.4462 |
Duplex Steel UNS S31803/S32205 Pipe Fittings Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
Duplex Steel S31803 | 0.030 max | 2.0 max | 1.0 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 |
Duplex Steel S32205 | 0.030 max | 2.0 max | 1.0 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 |
Duplex Steel UNS S31803/S32205 Piping & Tubing Mechanical Properties
Grade | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
S31803 / S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
Specification Of Duplex Steel UNS S31803/S32205 Pipe Fittings
S31803/S32205 Pipe Fittings Specifications | ASTM A815/ ASME SA815 |
---|---|
S31803/S32205 Duplex Steel Pipe Fittings size | S31803/S32205 Seamless Butt Weld Fittings : 1/2″ – 10″ S31803/S32205 Welded Butt Weld Fittings : 1/2″ – 48″ |
Duplex S31803/S32205 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Duplex S31803/S32205 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
S31803/S32205 Buttweld Pipe FittingsType | DN15-DN1200 |
ASTM A815 S31803/S32205 Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A815 Grade S31803/S32205 Pipe Fitting |
Size Range | ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A815 S31803/S32205 Buttweld Fitting |
ASTM A815 S31803/S32205 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
S31803/S32205 Duplex Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SA 815 S31803/S32205 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | Duplex UNS S31803/S32205, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
ASTM A815 UNS S31803/S32205 Pipe Elbow Dimensions Standard
NOMINAL PIPE SIZE | ALL FITTINGS | ALL FITTINGS | ELBOWS AND TEES | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | REDUCERS | CAPS |
---|---|---|---|---|---|---|---|---|
NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Centre -to- End Dimension A, B, C, M | Centre-to- Centre O | Back-to- Face K | Alignment of Ends U | Overall Length H | Overall Length E |
½ to 2½ | 0.06 -0.03 |
0.03 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
3 to 3 ½ | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
4 | 0.06 | 0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
5 to 8 | 0.09 -0.06 |
0.06 | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
10 to 18 | 0.16 -0.12 |
0.12 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
20 to 24 | 0.25 -0.19 |
0.19 | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
26 to 30 | 0.25 -0.19 |
0.19 | 0.12 | … | … | … | 0.19 | 0.38 |
32 to 48 | 0.25 -0.19 |
0.19 | 0.19 | … | … | … | 0.19 | 0.38 |
ASTM A815 Duplex S31803/S32205 Pipe Fittings Dimensions Standard
Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Dimensions Chart Of Duplex Steel 2205 Reducer Fittings
NOMINAL PIPE SIZE | OUTSIDE DIAMETER | END TO END | |
---|---|---|---|
Inch | D | P | H |
3/4 x 1/2 | 26.7 | 21.3 | 38 |
3/4 x 3/8 | 26.7 | 17.1 | 38 |
1 x 3/4 | 33.4 | 26.7 | 51 |
1 x 1/2 | 33.4 | 21.3 | 51 |
1 1/4 x 1 | 42.2 | 33.4 | 51 |
1 1/4 x 3/4 | 42.2 | 26.7 | 51 |
1 1/4 x 1/2 | 42.2 | 21.3 | 51 |
1 1/2 x 1 1/2 | 48.3 | 42.2 | 64 |
1 1/2 x 1 | 48.3 | 33.4 | 64 |
1 1/2 x 3/4 | 48.3 | 26.7 | 64 |
1 1/2 x 1/2 | 48.3 | 21.3 | 64 |
2 x 1 1/2 | 60.3 | 48.2 | 76 |
2 x 1 1/4 | 60.3 | 42.2 | 76 |
2 x 1 | 60.3 | 33.4 | 76 |
2 x 3/4 | 60.3 | 26.7 | 76 |
2 1/2 x 2 | 73 | 60.3 | 89 |
2 1/2 x 1 1/2 | 73 | 48.3 | 89 |
2 1/2 x 1 1/4 | 73 | 42.2 | 89 |
2 1/2 x 1 | 73 | 33.4 | 89 |
3 x 2 1/2 | 88.9 | 73 | 89 |
3 x 2 | 88.9 | 60.3 | 89 |
3 x 1 1/2 | 88.9 | 48.3 | 89 |
3 x 1 1/4 | 88.9 | 42.2 | 89 |
3 1/2 x 3 | 101.6 | 88.9 | 102 |
3 1/2 x 21/2 | 101.6 | 73 | 102 |
3 1/2 x 2 | 101.6 | 60.3 | 102 |
3 1/2 x 1 1/2 | 101.6 | 48.3 | 102 |
3 1/2 x 1 1/4 | 101.6 | 42.2 | 102 |
4 x 3 1/2 | 114.3 | 101.6 | 102 |
4 x 3 | 114.3 | 88.9 | 102 |
4 x 2 1/2 | 114.3 | 73 | 102 |
4 x 2 | 114.3 | 60.3 | 102 |
4 x 1 1/2 | 114.3 | 48.3 | 102 |
5 x 4 | 141.3 | 114.3 | 127 |
5 x 3 1/2 | 141.3 | 101.6 | 127 |
5 x 3 | 141.3 | 88.9 | 127 |
5 x 2 1/2 | 141.3 | 73 | 127 |
5 x 2 | 141.3 | 60.3 | 127 |
6 x 5 | 168.3 | 141.3 | 140 |
6 x 4 | 168.3 | 114.3 | 140 |
6 x 3 1/2 | 168.3 | 101.6 | 140 |
6 x 3 | 168.3 | 88.9 | 140 |
6 x 2 1/2 | 168.3 | 73 | 140 |
8 x 6 | 219.1 | 168.3 | 152 |
8 x 5 | 219.1 | 141.3 | 152 |
8 x 4 | 219.1 | 114.3 | 152 |
8 x 3 1/2 | 219.1 | 101.6 | 152 |
10 x 8 | 273.1 | 219.1 | 178 |
10 x 6 | 273.1 | 168.1 | 178 |
10 x 5 | 273.1 | 141.3 | 178 |
10 x 4 | 273.1 | 114.3 | 178 |
12 x 10 | 323.9 | 273.1 | 203 |
12 x 8 | 323.9 | 219.1 | 203 |
12 x 6 | 323.9 | 168.3 | 203 |
12 x 5 | 323.9 | 141.3 | 203 |
14 x 12 | 355.6 | 323.9 | 330 |
14 x 10 | 355.6 | 273.1 | 330 |
14 x 8 | 355.6 | 219.1 | 330 |
14 x 6 | 355.6 | 168.3 | 330 |
16 x 14 | 406.4 | 355.6 | 356 |
16 x 12 | 406.4 | 323.9 | 356 |
16 x 10 | 406.4 | 273.1 | 356 |
16 x 8 | 406.4 | 219.1 | 356 |
16 x 6 | 406.4 | 168.3 | 356 |
18 x 16 | 457 | 406.4 | 381 |
18 x 14 | 457 | 355.6 | 381 |
18 x 12 | 457 | 323.9 | 381 |
18 x 10 | 457 | 273.1 | 381 |
18 x 8 | 457 | 219.1 | 381 |
20 x 18 | 508 | 457 | 508 |
20 x 16 | 508 | 406.4 | 508 |
20 x 14 | 508 | 355.6 | 508 |
20 x 12 | 508 | 323.9 | 508 |
20 x 10 | 508 | 273.1 | 508 |
20 x 8 | 508 | 219.1 | 508 |
22 x 20 | 559 | 508 | 508 |
22 x 18 | 559 | 457 | 508 |
22 x 16 | 559 | 406.4 | 508 |
22 x 14 | 559 | 355.6 | 508 |
22 x 12 | 559 | 323.9 | 508 |
24 x 10 | 559 | 273.1 | 508 |
24 x 22 | 610 | 559 | 508 |
24 x 20 | 610 | 508 | 508 |
24 x 18 | 610 | 457 | 508 |
24 x 16 | 610 | 406.4 | 508 |
24 x 14 | 610 | 355.6 | 508 |
24 x 12 | 610 | 323.9 | 508 |
24 x 10 | 610 | 273.1 | 508 |
Duplex Steel 2205 Pipe Fittings Suppliers In ndia |
ASME B16.9 Seamless Duplex Steel UNS S31803 Pipe Fittings, Duplex 2205 Elbow, Din 1.4462 Reducer Weight Chart
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
90 Deg Elbow | 45 Deg Elbow | Equal tee | 90 Deg Elbow | 45 Deg Elbow | Equal tee | 90 Deg Elbow | 45 Deg Elbow | Equal tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
Duplex Steel S31803/S32205 Elbow 90 Deg, Elbow 45 Deg, Return Elbow 180 Deg Dimension
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
Weight Chart of WERKSTOFF NR. 1.4462 Reducing Tee, Duplex Steel S31803/S32205 Concentric & Eccentric Reducers
Product range and theoretical weights (kg) | |||||||||
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50×25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50×40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100×50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100×80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150×80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150×100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200×100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200×150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
ASME SA815 Duplex Steel S31803/S32205 Buttweld Fitting Classes for WP Grades
Class | Construction | Non-destructive Examination |
---|---|---|
S | Seamless | None |
W | Welded | Radiography or Ultrasonic |
WX | Welded | Radiography |
WU | Welded | Ultrasonic |
Manufacturing Standards of Duplex Steel S31803/S32205 Buttweld Fittings
American Steel Pipe Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-815 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Duplex butt-welding fittings |
MSS SP-43 | Wrought Duplex butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Duplex S31803/S32205 Types of Buttweld Fittings We Supply
Duplex S31803 90° Weldable SR Elbow | UNS S32205 Pipe Reducers |
ASME B16.9 Duplex S32205 90° Reducing Elbow | S31803 Duplex Stainless Steel Welded Pipe Fittings |
S31803 Duplex 180° LR Return Bend | Duplex Steel S31803 Seamless Reducing Tee |
S31803 DSS Seamless Fittings | Duplex S32205 1D Elbow/3D Elbow/5D Elbow |
DSS S31803 Weldable 1.5D Elbow | SAF 2205 Two Halve Butt weld Fittings |
Duplex Steel 1.4462 Stub End Exporter | UNS S31803 Buttweld Pipe Fittings |