Stainless Steel 310S/310/310H Sheets & Plates
India’s Leading Grade 310 Sheets, SS Gr 310S Plates, 310H Austenitic Stainless Steel Shim Sheets, UNS S31008 Stainless Steel #4 Polish finish Sheet Manufacturer & Supplier in India.
Suppliers and Manufacturer of Stainless Steel 310 / 310S / 310H Sheets Plates Coils, which are made from excessive first-rate uncooked cloth the use of the contemporary norms and traits of generation. These UNS S31000 Sheets Plates Coils are smooth to form, weld, and fabricate and their resistance to corrosion from, among different things, acids certainly contained in meals has ended in them getting used extensively within the foods and drinks processing industries. The stainless steel 310 plate should be firm and steady. Tungsten, molybdenum, vanadium and chromium in 310 temperature stainless steel used for various combinations of cemented carbide farmers to improve the high-temperature performance often cobalt or nickel. Our offered range of SS 310 / 310S / 310H Sheets, Plates and Coils are austenitic steel alloys that syndicate properties like outstanding ductility, high temperature withstanding belongings, and good weldability in one. We are devoted to constantly supplying an intensive variety of our sheets, that’s evolved with the aid of using use of excessive grade first-rate uncooked substances and state – of – artwork machines in compliance with set commercial first-rate requirements.
It has capabilities like Good weld ability, High mechanical power, and High resistance to all varieties of corrosion. Our presented variety of UNS S31009 Sheets Plates Coils is extensively demanded within the marketplace because of their excessive first-rate. Seating coil 310/310s/310H stainless steel Sheets & Plates is usually made in customer specifications and small quantities, which have different dimensions and tolerances for flatness, profiles, smoothness and other properties. The environmental impact is reduced because the 310S stainless steel hollow wire can have infinite recycling. SS Grades 310/310S/310H are produced in the temperature run 975 – 1175°C. Substantial work is completed down to 1050°Cand a light finish is applied to the base of the range. These include features of diverse factors like nickel, chromium, vanadium, silicon, molybdenum, manganese, tungsten, silicon, phosphorous, and sulphur. We provide specialised variety of sheets, which are made the use of excessive grade cloth sourced from dependable companies within the marketplace. We offer high-quality products at the most reasonable prices.
ASTM A240 Grade 310S Cold Rolled Sheets, UNS S31000 Plates, Grade 310S Shim Sheets, DIN 1.4845 Perforate Sheet, Stainless Steel 310 CR Plates Manufacturer in Mumbai, India.
ASTM A240 Stainless Steel 310 / 310S / 310H Sheets & Plates Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310H | – | S31009 | – | – | – | – | – |
ASME SA240 Stainless Steel 310 / 310S / 310H Sheets & Plates Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310 | 0.015 max | 2.0 max | 0.15 max | 0.020 max | 0.015 max | 24 – 26 | 0.10 max | 19 – 21 | 54.7 min |
SS 310S | 0.08 max | 2.0 max | 1.00 max | 0.045 max | 0.030 max | 24 – 26 | 0.75 max | 19 – 21 | 53.095 min |
SS 310H | 0.04 – 0.1 | 2.0 max | 1.00 max | 0.045 max | 0.030 max | 24 – 26 | – | 19 – 21 | 53.885 min |
Stainless Steel 310 / 310S / 310H Sheets & Plates Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
SS 310/310S/310H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Stainless Steel 310S / 310 / 310H Sheets & Plates Specification
310S / 310 / 310H Sheets & Plates Specifications | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
---|---|
310S / 310 / 310H Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
SS 310S / 310 / 310H Sheets & Plates Size Range | Cold rolled ASME SA240 Grade 310S / 310 / 310H Stainless Steel Sheet 0.5-6.4 mm Hot rolled ASME SA240 Grade 310S / 310 / 310H Stainless Steel Sheet 3.0–10.0 mm |
310S / 310 / 310H SS Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
SS 310S / 310 / 310H Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
SS 310S / 310 / 310H Sheets & Plates Thickness | 0.3 mm to 120 mm |
International Standard of Stainless Steel 310S / 310 / 310H Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) of Stainless Steel 310S / 310 / 310H Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SA240 310S / 310 / 310H SS Strips EN 10088 SA -240- 310S / 310 / 310H Strips |
Finish of SS 310S / 310 / 310H Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Stainless Steel 310S / 310 / 310H Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Stainless Steel 310S / 310 / 310H Sheets & Plates Finishes
Surface Finish | Definition | Application |
---|---|---|
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Stainless Steel 310S / 310 / 310H Sheets & Plates Standard
Standard | Description |
ASTM A240M | Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and general applications. |
ASTM A263 | Corrosion resisting chromium steel clad plate, sheet and strip. |
ASTM A264 | Stainless chromium-nickel steel clad plate, sheet and strip. |
ASTM A666 | Austenitic stainless steel sheet, strip, plate and flat bar for structural applications. |
ASTM A693 | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
ASTM A480/A480M | General requirements for flat rolled stainless and heat resisting steel plate, sheet and strip. |
ASTM A793 | Specification for Rolled Floor Plate, Stainless Steel |
ASTM A895 | Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip |
EN 10088-2 | Stainless steels – Part 2: Technical delivery conditions for sheet/plate and strip for general purposes. |
AMS 5511 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr – 9.5Ni (310S), Solution Heat Treated |
AMS 5513 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr – 9.2Ni (SAE 30310), Solution Heat Treated |
AMS 5501 | Steel, Corrosion Resistant, Sheet, Strip, and Foil, 19Cr – 9.5Ni (310), Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
- Stainless Steel 310S Sheets
- SS 310 Plates
- 310H SS Sheet
- UNS S31008 Plates
- 1.4841 Sheet Supplier
- Stainless Steel 310H Plates
- SS 310 Sheets
- 310S Stainless Plate
- SS X8CrNi25-21 2B Finish Sheets
- INOX 1.4845 Plates
- 310 Stainless Steel 8 Finish Shims
- SS 310H Shim Sheets
- 310S Stainless Shim Plates
- DIN 1.4841 Shim Sheet Supplier
- UNS S31009 Shim Plates