ASME B16.47 Class 300 Series B Welding Neck Flanges
India’s Leading SS ASME B16.47 Class 300 Series B Weld Neck Flange Supplier in india, Class 300 BS4504 Series B WN Flanges, ASME B16.47 #300 Series B Weld Neck Flange Pn 100 Manufacturer & Supplier in India.
Kanak Steel & Engg Co. is an eminent trading and manufacturing unit of ASME B16.47 Class 300 Series B Welding Neck Flanges, which will be standardized in all of thickness.
They are being contrived for use in strain vessel applications, and for this reason those forms of plates are utilized in such applications. In addition, they’re typically utilized in Gas, Petrochemical and Oil industries. The fabric of its miles truly normalised metal that is being warmness handled and as an end result indicates tensile electricity and extra yield than the extra widespread grades. Copper Nickel ASME B16.47 Class 300 Series B Welding Neck Flanges are notably praised for its advanced electricity, mild weight, competence, corrosion resistance and maximum beneficial pleasant.
They are pretty immune to appalling climate and its chemical composition makes it tough to rust whilst the use of in city and commercial environment. The use of corrosion resistance metal will face the occasions higher due to advent of an enthusiast defensive oxide movie at the floor, if it’s being left undisturbed. Meanwhile, the usage of climate resistant metal as nicely makes those supply in longer carrier life. Titanium Alloy ASME B16.47 Class 300 Series B Welding Neck Flanges is supposed for advanced strength low alloy structural metal with the aid of 100mm thickness to 345Mpa minimal yield point.
It indicates signal of advanced corrosion resistance over widespread carbon metal due to the increase of a defensive oxide movie at the metals floor which slows down similarly corrosion. They are pretty famed as ‘the weathering metal’ and additionally as a protective layer that develops at the metal floor whilst used uncoated and in hazardous climate situations. They are immune to awful climate and its chemical composition makes it immune to rust whilst the use of in commercial and concrete environment. Alloy 20 ASME B16.47 Class 300 Series B Welding Neck Flanges use simply top rate pleasant of fabric inclusive of steel and metal for fabricating and production those alloys. They are thermostatically built and balanced by means of the use of steel alloys within the agency and aid of maximum latest technology.
Largest Manufacturer & Supplier of ASME B16.47 Class 300 Series B Welding Neck Flange Threaded, DIN 2641 Series B Weld Neck Flange, DIN 2635 Series B Weld Neck Flange, EN1092-1 Weld Neck Flange in Mumbai, India.
Specification Of ASME B16.47 Class 300 Series B Weld Neck Flange
ASME B16.47 Class 300 Series B Welding Neck Flanges Size Chart | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
---|---|
ASME B16.47 Class 300 Series B Welding Neck Flanges Standards | ASME/, B16.47 Series B & B, B16.48, BS4504, BS 10, EN-1092, DIN, ASME Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME//16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
ASME B16.47 Class 300 Series B Welding Neck Flanges Pressure Rating ASME | Class 300 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
ASME B16.47 Class 300 Series B Welding Neck Flanges Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
Most common types of ASME B16.47 Class 300 Series B Welding Neck Flanges | Forged / Threaded / Screwed / Plate |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production technique |
|
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
Special design | As per your drawing
AS, ASME, BS, DIN and JIS |
Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Origin | Indian / West Europe / Japan / USA / Korean |
Manufacturer of | ASME DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASME B16.47 Class 300 Series B Welding Neck Flanges: -BS Flange, EN Flange, API 6A Flanges, ASME Flanges, ASME Flanges, DIN Flanges, EN1092-1 Flanges, UNI Flanges, JIS/ KS Flanges, BS4504 Flanges, GB Flanges, AWWA C207 Flanges, GOST Flanges, PSI Flangse
|
ASME B16.47 Class 300 Series B Welding Neck Flanges Uses & application |
|
Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Manufacturing ASME B16.47 Class 300 Series B Welding Neck Flanges Specification
Nominal Pipe Size | Outside Diameter (O) | Minimum Thickness (T) | Raised Face Diameter (R) | Length Thru Hub (Y) | Hub Diameter (X) | Minimum Fillet Radius (r) | Top of Hub (A) | Bore (B) | Approximate Weight (lbs) | Bolt Circle (C) | Number of Holes | Diameter of Holes |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 34.12 | 3.50 | 29.00 | 5.69 | 27.62 | 0.56 | 26.19 | Specified by purchaser | 400 | 31.62 | 32 | 1.38 |
28 | 36.25 | 3.50 | 31.00 | 5.88 | 29.75 | 0.56 | 28.19 | Specified by purchaser | 450 | 33.75 | 36 | 1.38 |
30 | 39.00 | 3.69 | 33.25 | 6.22 | 32.00 | 0.56 | 30.25 | Specified by purchaser | 550 | 36.25 | 36 | 1.50 |
32 | 41.50 | 4.06 | 35.50 | 6.62 | 34.00 | 0.62 | 32.25 | Specified by purchaser | 685 | 38.50 | 32 | 1.62 |
34 | 43.62 | 4.06 | 37.50 | 6.81 | 36.12 | 0.62 | 34.25 | Specified by purchaser | 750 | 40.62 | 36 | 1.62 |
36 | 46.12 | 4.06 | 39.75 | 7.12 | 38.00 | 0.62 | 36.25 | Specified by purchaser | 840 | 42.88 | 32 | 1.75 |
38 | 48.12 | 4.38 | 41.75 | 7.56 | 40.00 | 0.62 | 38.25 | Specified by purchaser | 915 | 44.88 | 36 | 1.75 |
40 | 50.12 | 4.56 | 43.88 | 7.81 | 42.00 | 0.62 | 40.25 | Specified by purchaser | 990 | 46.88 | 40 | 1.75 |
42 | 52.50 | 4.69 | 46.00 | 8.06 | 44.00 | 0.62 | 42.31 | Specified by purchaser | 1135 | 49.00 | 36 | 1.88 |
44 | 54.50 | 5.00 | 48.00 | 8.44 | 46.19 | 0.62 | 44.31 | Specified by purchaser | 1235 | 51.00 | 40 | 1.88 |
46 | 57.50 | 5.06 | 50.00 | 8.75 | 48.38 | 0.62 | 46.31 | Specified by purchaser | 1470 | 53.75 | 36 | 2.00 |
48 | 59.50 | 5.06 | 52.25 | 8.81 | 50.31 | 0.62 | 48.31 | Specified by purchaser | 1575 | 55.75 | 40 | 2.00 |
50 | 61.50 | 5.44 | 54.25 | 9.25 | 52.38 | 0.62 | 50.31 | Specified by purchaser | 1710 | 57.75 | 44 | 2.00 |
52 | 63.50 | 5.62 | 56.25 | 9.56 | 54.44 | 0.62 | 52.31 | Specified by purchaser | 1840 | 59.75 | 48 | 2.00 |
54 | 65.88 | 5.38 | 58.25 | 9.44 | 56.50 | 0.62 | 54.31 | Specified by purchaser | 1980 | 62.12 | 48 | 2.00 |
56 | 69.50 | 6.06 | 60.50 | 10.56 | 58.81 | 0.69 | 56.31 | Specified by purchaser | 2595 | 65.00 | 36 | 2.38 |
58 | 71.94 | 6.06 | 62.75 | 10.81 | 60.94 | 0.69 | 58.31 | Specified by purchaser | 2770 | 67.44 | 40 | 2.38 |
60 | 73.94 | 5.94 | 65.00 | 10.69 | 62.94 | 0.69 | 60.31 | Specified by purchaser | 2870 | 69.44 | 40 | 2.38 |
ASME B16.47 Class 300 Series B Weld Neck Flanges Dimensions
Thickness | Drilling | Weight | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nom Size | OD | Blind | Weld Neck | OD of RF | Dia. at Base | Bore | LTH | Bolt Circle | Dia Bevel | Bolt Length | # of Holes | Hole Dia | Weld Neck | Blind |
O | C | C | R | X | B | Y | A | (1) | (2) | |||||
26 | 30.94 | 1.69 | 1.57 | 28 | 26.94 | As per Client | 3.44 | 29.31 | 26.06 | 5.5 | 36 | 0.88 | 120 | 373 |
28 | 32.94 | 1.82 | 1.69 | 30 | 28.94 | 3.69 | 31.31 | 28.06 | 5.75 | 40 | 0.88 | 140 | 454 | |
30 | 34.94 | 1.94 | 1.69 | 32 | 31 | 3.88 | 33.31 | 30.06 | 6 | 44 | 0.88 | 150 | 543 | |
32 | 37.06 | 2.07 | 1.75 | 34 | 33.06 | 4.19 | 35.44 | 32.06 | 6.25 | 48 | 0.88 | 170 | 648 | |
34 | 39.56 | 2.19 | 1.88 | 36.25 | 35.12 | 4.28 | 37.69 | 34.06 | 6.75 | 40 | 1 | 210 | 783 | |
36 | 41.62 | 2.25 | 2 | 38.25 | 37.19 | 4.57 | 39.75 | 36.06 | 6.75 | 44 | 1 | 240 | 890 | |
38 | 44.25 | 2.44 | 2.07 | 40.25 | 39.25 | 4.82 | 42.12 | 38.12 | 7.5 | 40 | 1.12 | 290 | 1089 | |
40 | 46.25 | 2.57 | 2.13 | 42.5 | 41.31 | 5 | 44.12 | 40.12 | 7.75 | 44 | 1.12 | 310 | 1247 | |
42 | 48.25 | 2.63 | 2.25 | 44.5 | 43.38 | 5.19 | 46.12 | 42.12 | 7.75 | 48 | 1.12 | 345 | 1393 | |
44 | 50.25 | 2.75 | 2.32 | 46.5 | 45.38 | 5.32 | 48.12 | 44.12 | 8 | 52 | 1.12 | 370 | 1579 | |
46 | 52.81 | 2.88 | 2.38 | 48.62 | 47.44 | 5.63 | 50.56 | 46.12 | 8.5 | 40 | 1.25 | 435 | 1824 | |
48 | 54.81 | 3 | 2.5 | 50.75 | 49.5 | 5.82 | 52.56 | 48.12 | 8.75 | 44 | 1.25 | 480 | 2045 | |
50 | 56.81 | 3.13 | 2.63 | 52.75 | 51.5 | 6 | 54.56 | 50.12 | 9 | 48 | 1.25 | 520 | 2284 | |
52 | 58.81 | 3.25 | 2.69 | 54.75 | 53.56 | 6.13 | 56.56 | 52.12 | 9.25 | 52 | 1.25 | 550 | 2547 | |
54 | 61 | 3.38 | 2.75 | 56.75 | 55.62 | 6.32 | 58.75 | 54.12 | 9.5 | 56 | 1.25 | 620 | 2848 | |
56 | 63 | 3.5 | 2.82 | 58.75 | 57.69 | 6.5 | 60.75 | 56.12 | 9.75 | 60 | 1.25 | 650 | 3144 | |
58 | 65.94 | 3.62 | 2.88 | 60.75 | 59.69 | 6.82 | 63.44 | 58.12 | 10 | 48 | 1.38 | 780 | 3560 | |
60 | 67.94 | 3.75 | 2.94 | 63 | 61.81 | 7 | 65.44 | 60.12 | 10.25 | 52 | 1.38 | 850 | 3913 |
B16.47 Class 300 Series B Welding Neck Flange Material
Carbon Steel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Stainless Steel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Alloy Steel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
Titanium ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Copper ASME B16.47 Class 300 Series B Welding Neck Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Copper Nickel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Brass ASME B16.47 Class 300 Series B Welding Neck Flanges | 3602 / 2604 / H59 / H62 / etc. |
Inconel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 ASME B16.47 Class 300 Series B Welding Neck Flanges |
Hastelloy ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Monel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Alloy 20 ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Aluminium ASME B16.47 Class 300 Series B Welding Neck Flanges | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Nickel ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Duplex ASME B16.47 Class 300 Series B Welding Neck Flanges | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Super Duplex ASME B16.47 Class 300 Series B Welding Neck Flanges | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Incoloy ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
254 Smo ASME B16.47 Class 300 Series B Welding Neck Flanges | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
Nimonic ASME B16.47 Class 300 Series B Welding Neck Flanges | Nimonic 75, Nimonic 80A, Nimonic 90 |
Other ASME B16.47 Class 300 Series B Welding Neck Flanges material | Tin bronze, Aluminum bronze, Lead bronze |
ASME B16.47 #300 Series B Weld Neck Flange Weight Chart
Minimal Pipe Size | Dimensions | Weight (Kg) | ||||
---|---|---|---|---|---|---|
NPS (inch.) |
DN (millimeter) | O.D. (Millimeter) |
Thickness D (mm) |
SOW Socket Weld |
Blind | WN |
1/2 | 15 | 88.9 | 11.2 | 0.4 | 0.4 | 0.5 |
3/4 | 20 | 98.6 | 12.7 | 0.6 | 0.6 | 0.7 |
1 | 25 | 108 | 14.2 | 0.8 | 0.9 | 1 |
1 1/4 | 32 | 117.3 | 15.7 | 1 | 1.2 | 1.3 |
1 1/2 | 40 | 127 | 17.5 | 1.3 | 1.5 | 1.7 |
2 | 50 | 152.4 | 19.1 | 2.1 | 2.4 | 2.6 |
2 1/2 | 65 | 177.8 | 22.4 | 3.3 | 3.9 | 4.1 |
3 | 80 | 190.5 | 23.9 | 3.9 | 4.9 | 4.9 |
3 1/2 | 90 | 215.9 | 23.9 | 4.8 | 6.2 | 6.1 |
4 | 100 | 228.6 | 23.9 | 5.3 | 7.0 | 6.8 |
5 | 125 | 254 | 23.9 | 6.1 | 8.6 | 8.6 |
6 | 150 | 279.4 | 25.4 | 7.5 | 11.3 | 10.6 |
8 | 200 | 342.9 | 28.4 | 12.1 | 19.6 | 17.6 |
10 | 250 | 406.4 | 30.2 | 16.5 | 28.6 | 24 |
12 | 300 | 482.6 | 31.8 | 26.2 | 43.2 | 36.5 |
14 | 350 | 533.4 | 35.1 | 34.6 | 58.1 | 48.4 |
16 | 400 | 596.9 | 36.6 | 44.8 | 76.1 | 60.6 |
18 | 450 | 635 | 39.6 | 48.9 | 93.7 | 68.3 |
20 | 500 | 698.5 | 42.9 | 61.9 | 122.0 | 84.5 |
24 | 600 | 812.8 | 47.8 | 86.9 | 185.0 | 115 |
Types of ASME B16.47 Class 300 Searies A Weld Neck Flanges We Supply
ASME B16.47 300LB Series B WN Flange Supplier in Mumbai | Class 300 Series B Weld Neck Flange Manufacturer in India |
BS4504 Series B Weld Neck Flange #300 | Class 300 Series B BS3293 Weld Neck Flange |
Series B #300 BS1560 Weld Neck Flange | ASME B16.47 #300 Series B Weld Neck Flange Pn10 |
ASME B16.47 #300 Series B Weld Neck Flange Pn40 | ASME B16.47 Class 300 Series B Weld Neck Flange Pn 160 |
ASME B16.47 Class 300 Series B Weld Neck Flange Pn 64 | ASME B16.47 #300 Series B Weld Neck Flange Dn150 |